Programs | Tradeworks

Program Descriptions

TradeWorks Academy offers nine Skilled Trades Fundamentals Programs under one
tuition, each designed to provide flexible, job-ready training across multiple trades.
Students may enroll in only one program at a time and must successfully complete that
program.

Complimentary access to additional Programs may be granted at the institution’s
discretion after enrollment and completion of the Initial Program and carries no tuition or
fees. Complimentary access is not guaranteed, does not constitute a new enrollment,
does not modify, extend, or restart the enrollment period, and does not create eligibility
for refunds, credits, transfers, or financial adjustments under any circumstances. To
view our complete SC CHEapproved Refund Policy, please visit the Refund Policy
section of our Student Catalog.

This structure ensures clarity, prevents multiple enrollments at once, supports student
progression, maintains transparency in refund policies, and allows for personalized
learning paths. Tuition is a flat fee that grants full access to all programs once the initial
program is completed.

Interplay Learning is the curriculum provider. TradeWorks Academy is fully responsible
for enrollment, instruction, compliance, and student support.

TradeWorks Academy Catalog

Skilled Trades Programs Offered

1. HVAC Fundamentals & Systems (~78 hours)

Standard Time to Completion: 7 weeks

Purpose: To prepare students for entry-level employment as HVAC technicians by providing foundational knowledge of heating, cooling, and refrigeration systems, safety standards, and troubleshooting practices.

Objectives: Graduates will be able to:

Apply OSHA safety standards in HVAC environments.
Identify and use common HVAC tools and equipment.
Demonstrate understanding of refrigeration cycles, heating, and cooling systems.
Perform basic troubleshooting and preventive maintenance.

Modules:

Safety & OSHA Standards – 6 hrs
Tools & Equipment – 8 hrs
Refrigeration Cycle – 10 hrs
Electrical Fundamentals – 12 hrs
Heating Systems – 12 hrs
Cooling Systems – 12 hrs
Troubleshooting & Diagnostics – 10 hrs
Preventive Maintenance – 8 hrs

Credentials: Students receive a TradeWorks Academy Certificate of Completion and Interplay Learning’s Job‑Ready Certificate. Program tuition includes bundled exam fees for NATE Ready‑to‑Work, EPA Section 608, and OSHA 10, administered through authorized third-party proctors. Credentials are awarded only upon successful completion of the required external exams

2. Construction Basics (~70 hours)

Standard Time to Completion: 6 Weeks

Purpose: To provide students with foundational construction knowledge and safety practices for entry-level roles in building construction.

Objectives: Graduates will be able to:

Apply OSHA construction safety standards.
Identify and use hand and power tools.
Demonstrate knowledge of building materials and structural basics.
Perform basic carpentry and finishing tasks.

Modules:

Construction Safety & OSHA – 8 hrs
Hand & Power Tools – 10 hrs
Building Materials – 12 hrs
Framing & Structural Basics – 12 hrs
Site Preparation & Layout – 10 hrs
Basic Carpentry & Finishing – 10 hrs
Construction Math & Measurements – 8 hrs

Credentials: Students receive a TradeWorks Academy Certificate of Completion and Interplay Learning’s Job‑Ready Certificate. Program

tuition includes the OSHA 10 exam fee, administered through an authorized third-party proctor. Credentials are awarded only upon successful completion of the external exam.

3. Multi-Family Maintenance (~80 hours)

Standard Time to Completion: 7 weeks

Purpose: To train students in the safe maintenance, troubleshooting, and repair of HVAC, plumbing, electrical, and appliance systems in multi-family housing.

Objectives: Graduates will be able to:

Apply OSHA safety standards in multi-family environments.
Maintain and repair HVAC, plumbing, and electrical systems.
Perform appliance repair and preventive maintenance.
Demonstrate knowledge of building codes and maintenance practices.

Modules:

Safety & OSHA – 8 hrs
HVAC Systems in Multi-Family Units – 15 hrs
Plumbing Systems – 15 hrs
Electrical Systems – 12 hrs
Appliance Repair – 10 hrs
Building Maintenance & Codes – 10 hrs
Troubleshooting & Preventive Maintenance – 10 hrs

Credentials: Students receive a TradeWorks Academy Certificate of Completion and Interplay Learning’s Job‑Ready Certificate. Program tuition includes bundled exam fees for EPA Section 608 and OSHA 10, administered through authorized third-party proctors. Credentials are awarded only upon successful completion of the required external exams.

4. Electrical Systems (~45 hours)

Standard Time to Completion: 4 weeks

Purpose: To provide students with foundational electrical knowledge and safety practices for residential and light commercial systems.

Objectives: Graduates will be able to:

Apply OSHA electrical safety standards.
Identify and use electrical tools and materials.
Demonstrate knowledge of wiring, circuits, and residential systems.
Perform basic troubleshooting and maintenance.

Modules:

Electrical Safety & OSHA – 6 hrs
Tools & Materials – 6 hrs
Basic Electrical Theory – 8 hrs
Wiring & Circuits – 10 hrs
Residential Systems – 8 hrs
Troubleshooting & Maintenance – 7 hrs

Credentials: Students receive a TradeWorks Academy Certificate of Completion and Interplay Learning’s Job‑Ready Certificate. Program tuition includes the OSHA 10 exam fee, administered through an authorized third-party proctor. Credentials are awarded only upon successful completion of the external exam.

5. Plumbing Systems (~71 hours)

Standard Time to Completion: 6 Weeks

Purpose: To provide students with a solid foundation in the principles, practices, and safety standards of the plumbing trade, with a focus on residential systems.

Objectives: Graduates will be able to:

Apply OSHA plumbing safety standards.
Identify and use plumbing tools and materials.
Install, maintain, and repair water supply and drainage systems.
Troubleshoot and service fixtures and appliances.

Modules:

Plumbing Safety & OSHA – 6 hrs
Tools & Materials – 8 hrs
Water Supply Systems – 12 hrs
Drainage & Waste Systems – 12 hrs
Fixtures & Appliances – 10 hrs
Installation & Repair – 12 hrs
Troubleshooting & Maintenance – 11 hrs

Credentials: Students receive a TradeWorks Academy Certificate of Completion and Interplay Learning’s Job‑Ready Certificate. Program tuition includes bundled exam fees for EPA Section 608 and OSHA 10, administered through authorized third-party proctors. Credentials are awarded only upon successful completion of the required external exams.

6. Appliances & Residential Electrical (~75 hours)

Standard Time to Completion: 6 weeks

Purpose: To train students in the safe installation, maintenance, and repair of common residential appliances and electrical systems.

Objectives: Graduates will be able to:

Apply OSHA safety standards in appliance and electrical work.
Demonstrate knowledge of wiring, circuits, and electrical fundamentals.
Install, maintain, and repair major and minor appliances.
Perform troubleshooting and preventive maintenance.

Modules:

Safety & OSHA – 6 hrs
Electrical Fundamentals – 10 hrs
Wiring & Circuits – 12 hrs
Major Appliances (Washers, Dryers, Refrigerators) – 12 hrs
Small Appliances – 10 hrs
Troubleshooting & Diagnostics – 12 hrs
Preventive Maintenance – 13 hrs

7. Building Maintenance (~72 hours)

Standard Time to Completion: 6 weeks

Purpose: To prepare students for entry-level roles in building and facility maintenance by providing training in HVAC, electrical, and appliance systems.

Objectives: Graduates will be able to:

Apply OSHA safety standards in building maintenance.
Perform preventive maintenance on HVAC, electrical, and appliance systems.
Troubleshoot and repair standard building systems.
Demonstrate knowledge of building codes and maintenance practices.

Modules:

Safety & OSHA – 6 hrs
HVAC Systems Overview – 12 hrs
Electrical Systems – 12 hrs
Appliance Systems – 10 hrs
Building Codes & Maintenance Practices – 12 hrs
Troubleshooting & Preventive Maintenance – 10 hrs
Facility Operations Basics – 10 hrs

8. Clean Energy Systems (~41 hours)

Standard Time to Completion: 4 week

Purpose: To provide students with foundational knowledge and practical skills in solar energy systems and renewable energy practices.

Objectives: Graduates will be able to:

Apply OSHA safety standards in solar installation.
Demonstrate knowledge of photovoltaic systems and installation practices.
Perform basic troubleshooting and maintenance of solar systems.
Identify career pathways in renewable energy.

Modules:

Solar Safety & OSHA – 5 hrs
Solar Energy Fundamentals – 6 hrs
Tools & Equipment – 5 hrs
Photovoltaic Systems – 8 hrs
Installation Practices – 8 hrs
Troubleshooting & Maintenance – 9 hrs

Credentials: Students receive a TradeWorks Academy Certificate of Completion and Interplay Learning’s Job‑Ready Certificate. Program tuition includes the OSHA 10 exam fee, administered through an authorized third-party proctor. Coursework also aligns with knowledge areas covered by NABCEP entry-level solar exams; however, NABCEP credentials require separate eligibility and testing through NABCEP’s approved process.

9. Solar (~71 hours)

Standard Time to Completion: 6 weeks

Purpose: To provide comprehensive training in solar energy systems, safety, installation, and maintenance practices for entry-level solar technician roles.

Objectives: Graduates will be able to:

Apply OSHA safety standards in solar installation.
Demonstrate knowledge of photovoltaic systems, electrical codes, and installation practices.
Perform troubleshooting and preventive maintenance of solar systems.
Prepare for entry-level employment as solar energy technicians.

Modules:

Solar Safety & OSHA – 5 hrs
Solar Energy Fundamentals – 6 hrs
Tools & Equipment – 5 hrs
Photovoltaic Systems – 8 hrs
Installation Practices – 8 hrs
Troubleshooting & Maintenance – 9 hrs
Electrical for Solar (Code, Circuits, Panels) - 10 hrs
Utility Solar Installation (Foundations, Racking, Wiring) – 12 hrs
Solar Career Readiness & Job Skills – 8 hrs

Credentials: Students receive a TradeWorks Academy Certificate of Completion and Interplay Learning’s Job‑Ready Certificate. Program tuition includes the OSHA 10 exam fee, administered through an authorized third-party proctor. Coursework also aligns with knowledge areas covered by NABCEP entry-level solar exams; however, NABCEP credentials require separate eligibility and testing through NABCEP’s approved process.

Program Descriptions

CONTACT